HOMEHOME > About quality > Inspection device

Inspection equipment

We have introduced a laser microscope for observing the surface of the product in detail and a fluorescent X-ray analyzer for analyzing the composition of the product in order to improve the quality of the product and to investigate the cause of quality troubles.
In addition, in order to strengthen the acceptance inspection and pre-shipment inspection every time we receive an import shipment, we ensure the quality assurance by carrying out sampling inspection using inspection equipment.
In addition, upon request from customers, we have a system in place to report the results of content inspections using fluorescent X-ray analysis equipment for 6 RoHS regulated substances including ENCO and EN71 regulated substances.

Shape analysis laser microscope

  • Shape analysis laser microscope
  • Shape analysis laser microscope inspection results

Keyence shape analysis laser microscope VK-X120/130

We have prepared an observation environment with high resolution and high magnification of 19200 nanometers and a maximum of XNUMX times.
In the surface roughness measurement, we used the numerical value of what used to depend on the sensory test, which was easy to cause variations, to visualize the difference of the surface.
When surface quality problems such as defective plating occur, we do not rely on the subcontractor to perform independent analysis and verify and improve the results.

Digital microscope

  • Digital microscope
  • Digital microscope inspection result

DinoLiteProPolarizer manufactured by Optoscience Co., Ltd.

The observation environment at a relatively low magnification of 10 to 230 times is very useful for visual inspection of small scratches, swelling, peeling, foreign matter adhesion, etc. that are difficult to see visually.
Visual observation may show signs of abnormality when observed with a digital microscope even at a pass level.
It is applied as appropriate to improve quality.

Fluorescent X-ray measuring device (stationary type)

  • Fluorescent X-ray measuring device (stationary type)
  • Fluorescent X-ray measuring device (stationary type) inspection result

Hitachi High-Tech Science Fluorescent X-ray measuring device EA1000AIII

We have been measuring and eliminating harmful substances from the past with the aim of creating safe and secure products.
We have newly introduced a fluorescent X-ray analyzer for screening of environmentally regulated substances that can significantly reduce the average inspection time.

X-ray fluorescence measuring device (Handy type)

  • X-ray fluorescence measuring device (Handy type)
  • Fluorescent X-ray measuring device (handy type) inspection result

Rigaku Niton Portable Component Analyzer NITON XLt 797RYW

We have been measuring and eliminating harmful substances from the past with the aim of creating safe and secure products.
We have newly introduced a fluorescent X-ray analyzer for screening of environmentally regulated substances that can significantly reduce the average inspection time.

Tensile strength inspection device

  • Tensile strength inspection device
  • Tensile strength inspection device

Aiko Engineering Digital Push Gauge RX-100

We have established our own quality standards for each product, such as mobile phone straps and hooks manufactured by our company, and carry out destructive inspection of tensile strength as appropriate.
It is also possible to provide individual inspection results upon customer request.
Example) A customer's mobile phone strap (pineapple string) is based on the standard of being able to hold for 5 seconds with a load of 10 kg.

Click Here to Contact Us

  • Click here for inquiries Eastern Japan 03-3876-1345
  • Contact us Western Japan 06-6643-7801
  • Inquiry Form
  • Request Catalog
  • 商談 予 約
  • Original goods production flow
top of page