2 Original goods production
Rewarm warmer (recycle warmer)
A nice item to receive during the cold season!
-A practical and useful item for a novelty for briefings during cold weather!
・For gifts and event prizes! It's fun to look at
・Reusable and ecology & economy (rewarm type)
・Interesting as a teaching material for children's science!
An ecology and economy rewarm warmer that can be used over and over again.
The principle is that the chemical reaction of the inner solution is used, and the feature is that it instantly warms up when the switch is pressed.
Also, since the chemical reaction of this content liquid does not reach a high temperature, there is no risk of burns or fire due to overheating.
(The peak temperature of the rewarm warmer is about 50℃) *1
Since the content liquid is an aqueous sodium acetate solution that is also used in food additives, it is safe even if it breaks and the liquid leaks. *2
(Sodium acetate is a food additive often used as a shelf life improver)
The liquid will solidify after use, but when reused, it must be boiled in boiling water to return to a liquid (about 3 to 5 minutes).
*1 Not recommended as a drink.
*2 Be careful of low temperature burns.
* 3 The online shop sells solid colors from one piece.
*4 The liquid may contain impurities such as sediment or turbidity, but since it is a lump of sodium acetate or coloring agent, it will not affect its use.
*5 Please avoid using it in places where excessive pressure is applied, such as in pants pockets.
The liquid inside is an aqueous sodium acetate solution, which generally has little skin irritation and is used as a food additive, so it is harmless. However, if it gets into your eyes or mouth, or if it comes in contact with your skin, immediately Please take measures such as rinsing with water. In some cases, please consult a doctor.
*6 Please be careful not to let sharp objects or protrusions come into contact with the warmer. There is a possibility of damaging the warmer and damaging the bag.
*7 Please keep out of reach of small children.
《Load capacity 10kg》
*Accident information
・The heating pad exploded while in use, causing liquid to leak and resulting in burns.
Cause: It is believed that when the product was in the pocket and the victim squatted, excessive pressure was applied, causing it to burst and come into contact with the skin, resulting in burns.
Measures to prevent recurrence: Added precautions for use.
Information provided to NITE (National Institute of Technology and Evaluation)
Eco Cairo Hokkairo Winter Autumn
Product code | 5911 |
---|---|
body size | Round type: φ10 cm |
Material | Cover: PVC Content liquid: Aqueous sodium acetate solution Button: Stainless steel |
Body color | Clear/pink/red/yellow/green/blue |
Insert name | Possible (pad printing or UV printing) |
Other | Peak temperature: Approx. 50℃ Insulation retention: Approx. 40 minutes |
Features
An ecology and economy rewarm warmer that can be used over and over again.
Adding your logo or emblem in one color makes it perfect for novelties and prizes.
You can also print illustrations in full color!Perfect for sales goods!
How to use/reuse
[How to use]
① Lightly press and bend the metal button in the body warmer until you hear a click.
② The liquid inside will crystallize white and generate heat. (Up to about 50℃)
It keeps a moderate warmth while the heat gradually decreases and lasts for about 40 minutes.
(Slightly different depending on usage conditions such as outside temperature)
* If the fever does not occur once, push the button toward the edge and bend it again.
After the fever starts, loosen it lightly or wrap it in a cloth to keep it warm for a long time.
[Reuse method]
Soak in boiling water and boil until no white crystals are visible (about 5 minutes).
When it has completely returned to liquid, cool it with running water, etc. If you cool it, you can use it again.
Explanation corner of mysterious principle
[Principle of warming]
The principle of heat generation in Cairo is "Heat of solidificationIt is due to a phenomenon called "."
When the liquid in Cairo becomes solid, it emits heat, which means that the liquid has more energy.
This is because it dissipates extra energy during the phase transition to a low energy state solid.
[Fever method]
To generate heat in the rewarming warmer, press and bend the metal button inside.
This stimulates the liquid inside (aqueous sodium acetate solution) and begins crystallization.
This crystallization generates the above "heat of solidification".
(It does not have to be metal if it can be given a similar stimulus)
[Phenomenon where solidification gradually spreads]
A phenomenon in which a liquid substance becomes more and more solid.This is when there is a piece of core solid
It is a phenomenon that it is derived from the surrounding liquid and becomes a solid. Called "crystallization", molecular composition
This is a phenomenon in which columns are aligned one after another.
[Sodium acetate aqueous solution]
Sodium acetate is a salt made from acetic acid and sodium.Preservatives such as pickles as food additives
It is also used instead.
The aqueous sodium acetate solution used in Rewarming Warmer is made by dissolving sodium acetate in purified water, and is used in Rewarming Warmer because it is extremely stable even in supercooled conditions*.
*Supercooling:
Supercooling means that even if the liquid is cooled past the freezing point (= transition point), it does not solidify and remains in the liquid state.
Phenomenon to do.If it is water, it means that it does not freeze even below zero degrees Celsius.In the first-class phase transition
This is a metastable state.
When some kind of stimulus (vibration, etc.) is applied to supercooled water, it crystallizes rapidly (inoculation freeze).
If it's in a bottle, just hit it and it will freeze, and if you try to transfer it to another container, it won't be poured.
As it freezes, columnar ice may form.
Print range/template
↓ Please download the template from here